Archive

Posts Tagged ‘Potable’

Florida Tank Inspection

April 24, 2010 Leave a comment

In August 2003 the state of Florida set a high standard for the inspection & cleaning of potable water storage tanks.  Under FDEP 62-55-350 each of the states potable water storage tanks must be inspected and cleaned at least once every five years.  The FDEP allowed a grace period until August of 2008 before any enforcement action was taken.

Ron Perrin Water Technologies offers Qualified Inspections meeting all Florida requirements for potable water tank inspections.  Using underwater cameras, ROV’s or divers we are able to inspect 100% of your facility without any disruption in service.

If your tank is out of compliance for the cleaning requirement our professional potable water divers are available to remove all sediment from your water storage tanks at competitive prices.

Call 1-888-481-1768 for a quote today!

Florida Inspection Rule:

62-555.350 Operation and Maintenance of Public Water Systems. (1) Suppliers of water shall operate and maintain their public water systems so as to comply with applicable standards in Chapter 62-550, F.A.C., and requirements in this chapter.   (2) Suppliers of water shall keep all necessary public water system components in operation and shall maintain such components in good operating condition so the components function as intended. Preventive maintenance on electrical or mechanical equipment – including exercising of auxiliary power sources, checking the calibration of finished-drinking-water meters at treatment plants, testing of air or pressure relief valves for hydropneumatic tanks, and exercising of isolation valves – shall be performed in accordance with the equipment manufacturer’s recommendations or in accordance with a written preventive maintenance program established by the supplier of water; however, in no case shall auxiliary power sources be run under load less frequently than monthly. Accumulated sludge and biogrowths shall be cleaned routinely (i.e., at least annually) from all treatment facilities that are in contact with raw, partially treated, or finished drinking water and that are not specifically designed to collect sludge or support a biogrowth; and blistering, chipped, or cracked coatings and linings on treatment or storage facilities in contact with raw, partially treated, or finished drinking water shall be rehabilitated or repaired. Finished-drinking-water storage tanks, including conventional hydropneumatic tanks with an access manhole but excluding bladder- or diaphragm-type hydropneumatic tanks without an access manhole, shall be checked at least annually to ensure that hatches are closed and screens are in place; shall be cleaned at least once every five years to remove biogrowths, calcium or iron/manganese deposits, and sludge from inside the tanks; and shall be inspected for structural and coating integrity at least once every five years by personnel under the responsible charge of a professional engineer licensed in Florida. Dead-end water mains conveying finished drinking water shall be flushed quarterly or in accordance with a written flushing program established by the supplier of water; additionally, dead-end or other water mains conveying finished water shall be flushed as necessary whenever legitimate water quality complaints are received.

Water Tower Inspector

Please visit our main web site at www.ronperrin.com

and our blogs at  www.tankdiver.us and  www.ronperrin.us

And our new Florida Blog at www.floridatankinspector.com

Advertisements